IC-7610 | Products | Icom Inc. (2023)

Innovative RF Direct Sampling System

IC-7610 | Products | Icom Inc. (1)

FPGA

Introduced with the IC-7300, Icom’s RF Direct Sampling System has made SDR performance affordable. Direct Sampling means incoming RF signals are digitized by the Analog-to-Digital Converter and immediately processed by the FPGA (Field-Programmable Gate Array). This process greatly reduces distortion that naturally occurs in the various mixer stages found in traditional superhetrodyne receivers.

Astonishing 110 dB* RMDR

IC-7610 | Products | Icom Inc. (2)

RMDR characteristics

The RF Direct Sampling System in the IC-7610 is capable of 110 dB RMDR. This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals. There is a difference you can actually hear as the desired signal comes out of the pileup!

* Representative value at 2 kHz frequency separation (Received frequency: 14.2 MHz, Mode: CW, IF BW: 500 Hz)

Customized VCXO Is Used for the Master Clock

IC-7610 | Products | Icom Inc. (3)

VCXO

(Video) Get to Know LEM Products, Inc. - Custom Safety Signs & Products

Reducing phase noise in a receiver is always a challenge as it is a natural characteristic of a receiver. The master clock of the IC-7610 utilizes a low phase noise VCXO (Voltage Controlled Crystal Oscillator), combined with Icom’s years of technical expertise to design a common power supply for the VCXO and FPGA, yielding an ultra-low phase noise. Also, a 10 MHz reference signal can be input to the IC-7610 for higher precision.

Independent Dual Receiver

Whether listening to both sides of a rare DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA.

DIGI-SEL for Main and Sub Bands

The DIGI-SEL preselectors are RF filters with sharp, narrow passband characteristics preventing Analog-to-Digital Converter overflow from large out-of-band signals when sampling the RF signals. Additionally the third and higher order IMD components are reduced. This is ideal when strong signals are received in a contest pile-up or from broadcast stations on adjacent frequencies or bands.

IC-7610 | Products | Icom Inc. (6)

BPF and preselector passband characteristics
receiving on 7.22 MHz

IC-7610 | Products | Icom Inc. (7)

Passband characteristics between the antenna
and the preselector (at the preselector output)

High Quality Speaker Sound

IC-7610 | Products | Icom Inc. (8)

Speaker unit

To finish out the receiver, is an internal speaker cabinet. The cabinet is tuned to reproduce clear, natural sounding audio, and is insulated from the radio chassis to prevent noise from vibration and panel resonance.

(Video) Leegin Creative Leather Products, Inc. v. PSKS, Inc. Case Brief Summary | Law Case Explained

Digital-Up-Conversion (DUC) for Clean TX

IC-7610 | Products | Icom Inc. (9)

Transmit phase noise characteristics

Breaking with the tradition of mixing a carrier signal with a local oscillator, a Digital-Up-Conversion (DUC) method is used to generate the required signal from the Digital-to-Analog Converter. The chart to the right shows the difference made by this new design.

Built-in Automatic Antenna Tuner

IC-7610 | Products | Icom Inc. (10)

Antenna tuner unit

The built-in automatic antenna tuner memorizes its settings based on your transmit frequency, so that it can recall the tuning setting when you switch operating bands. The emergency tuner function* enables you to operate for short periods of time with an antenna with a high SWR.

* Output power not guaranteed and power may be reduced.

7-inch Color Display with Touch Screen Function

IC-7610 | Products | Icom Inc. (11)

LCD comparison

The large 7-inch color display shows various operating and setting information at a glance in high resolution (800 × 480 pixels.) The display clearly shows various features, for example the dual spectrum scope aligned vertically or horizontally, simulated analog meters and RTTY, PSK31/63 mode decoded messages.

(Video) SAMI Pharmaceuticals company Products A-Z and uses|English|urdu/Hindi|Pharma info Pk

Dual Receivers, Dual Spectrum Scopes

IC-7610 | Products | Icom Inc. (12)

* Number of pixels shown at the 60 dB level, when receiving a signal.

The IC-7610 provides dual reception, on different bands, as does the high-speed, high-resolution spectrum scopes. Whether watching for a band opening, working a rare DX station operating split, or searching for a multiplier, the ability to watch each receiver separately allows the operator to concentrate on pulling in a weak signal. The scopes provide class-leading performance in resolution, sweep speed and a 100 dB dynamic range. Scroll mode automatically keeps the operating signal within the scope range. To navigate around the band easier, connect a PC mouse to the USB port for point and click tuning of the receivers.

Audio Scope Flexibility

IC-7610 | Products | Icom Inc. (13)

Audio scope example

The Audio Scope screen shows both a FFT scope with waterfall along with an oscilloscope for both transmit and receive audio. This makes it easy to monitor AF characteristics such as microphone compressor level, filter width, notch filter, and in CW, you can monitor received CW keying wave forms.

Touch Screen and Multi-Dial Knob for Smooth Operation

IC-7610 | Products | Icom Inc. (14)

(Video) SEM Products, Inc. - COLOR COAT

The combination of the touch screen and the multi-dial knob offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item by touching the screen and can adjust the levels by turning the multi-dial knob.

Remote Encoder for Second VFO Knob

IC-7610 | Products | Icom Inc. (15)

The optional RC-28 remote encoder enables you to add an external Sub dial for controlling the Sub band. Main band and Sub band can be switched with the F1 and F2 buttons and can be controlled with the RC-28. The LED above the F1 and F2 buttons turns ON to show the active band.

DVI-D Connector for an External Display Connection

The IC-7610 has a DVI-D connector for an external display. Operating frequency, setting information and spectrum scope can be observed on a large external display.

SD Card Slot and USB Port for Saving Data

When used with an SD card or USB flash drive, various contents including firmware updates, memory channels, captured screen images, and other personal settings, can be saved and loaded. TX/RX audio, voice memories, RTTY/CW memories and RTTY decode logs can be saved and used on the SD card.

I/Q Signal Output

The IC-7610 can output I/Q signals to a connected PC. Using the I/Q signals on theHDSDR (freeware), you can listen to received signals, or observe the spectrum scope on the PC. Used in combination with the CW Skimmer (Shareware) or N1MM Logger+ (Freeware), you can virtually decode all Morse signals in the operating band. This function is very useful for contesting and DX hunting, such as monitoring the activity in the band, and effective callback in split operation.

IC-7610 | Products | Icom Inc. (16)

*This function requires firmware version 1.20 or later. Download the IC-7610 USB I/Q package for HDSDR. See the IC-7610 instruction manuals for more details.

Simplified Remote Control for RS-BA1

Whether from a remote part of your home QTH, or on a remote location somewhere around the world, the RS-BA1 software enables you to operate your IC-7610. Not only can you control the radio settings and have both RX/TX audio paths, you are able to display a single band spectrum scope with the waterfall. With the addition of an Ethernet connector, a base station computer is not required.

RS-BA1 Version 2

Other Outstanding Features

RX antenna

・BNC type RX IN/OUT connectors for a receiver antenna or external BPF/preamp connection

CW mode

  • FPGA-controlled CW keying waveform shaping
  • Contest serial number counter
  • Normal or short Morse number style
  • Double key jack system
  • Full break-in and semi break-in
  • CW auto tuning
  • APF (Audio Peak Filter) function adjustable filter shape, width and AF level
  • Multi-function electronic keyer
  • CW pitch control from 300 Hz to 900 Hz
  • Auto repeat function

Receiver

  • 30 kHz to 60 MHz receiver(Some frequencies are not guaranteed.)
  • Two types of preamplifiers
    Preamp 1: Improves intermodulation characteristics
    Preamp 2: High gain preamplifier
  • 3 dB – 45 dB variable attenuator
  • IP+ function improves 3rd order intercept point performance
  • 101 memory channels
  • RTTY encoder and decoder
  • Twin peak audio filter for the RTTY mode
  • Adjustable AGC time constant from 0.1 to 6 seconds
  • Digital twin PBT eliminates interference from adjacent signals
  • Main/Sub band tracking function for diversity reception

Transmitter

  • TX monitor function
  • All mode power control
  • VOX (Voice Operated transmission) capability
  • BNC type transverter connector
  • Microphone equalizer and adjustable transmit bandwidth
  • 50 CTCSS tones

Operation

  • Memo pad stores up to 10 operating frequencies and modes
  • Quick split function
  • Quick Dualwatch function
  • RF gain and squelch control with a knob
  • RIT and ΔTX variable up to 9.999 kHz
  • UTC/local clock and timer function
  • 1 Hz pitch tuning and display
  • Dial lock function
  • Adjustable main dial brake
  • External speaker jacks for Main and Sub receivers
  • Screen saver function
  • Multi-function meter
    (S-meter, Power, ALC, COMP, SWR, ID, VD and TEMP)
  • Auto tuning step function
(Video) MaxEvac™ The Professional Evacuation Kit

Rear Panel View

IC-7610 | Products | Icom Inc. (17)

FAQs

Is Icom an American company? ›

Started in 1954 by Tokuzo Inoue in Osaka, Japan, Icom Inc. is a publicly held Japanese corporation; its stock is traded on the Tokyo and Osaka Stock Exchanges.

Where are Icom radios manufactured? ›

Made in Japan quality

Icom is a rare example of an electronics manufacturer that has not shifted production to lower cost countries, but kept its production base 100% in Japan. The Wakayama Icom plant has an advanced production system to produce small volume/multi-model wireless communication products.

What does Icom radio stand for? ›

Icom Incorporated, radio equipment manufacturer. Industrial Common Ownership Movement (ICOM), a co-operative federation that now forms part of Co-operatives UK.

What is Icom device? ›

ICOM is a suite of mobile devices enabling connected IoT solutions by uniting security, central administration and low total cost of ownership. Why choose ICOM? Improves operational efficiencies via tailored solution. Decreases financial liabilities by lowering onboarding costs. Provides tamper-resistant connected IoT.

Who founded the company ICom? ›

Inoue Electric Seisakusho

Where is ICom 7300 made? ›

ICOM IC7300 – still made in Japan.

Are ICOM radios made in China? ›

All ICOM radios are made in Japan

The only ICOM products that might be produced outside the factories in Japan are certain accessories produced by ICOM approved manufacturers such as batteries, chargers, microphones and other items.

Where are Kenwood radios made? ›

Modern Day Kenwood

The Kenwood USA Corporation subsidiary is currently located in Long Beach, California. They are not only in Japan and the United States, but also many countries around the globe.

Are Yaesu radios made in Japan? ›

Yaesu, founded as Yaesu Musen Co., Ltd. (八重洲無線株式会社, Yaesu Musen Kabushiki-gaisha) in 1959 by a Japanese radio amateur Sako Hasegawa with call sign JA1MP in the Tokyo neighborhood of Yaesu, is a Japanese brand of commercial and amateur radio equipment.

What is the purpose of the retransmission station? ›

The retransmission station operator functions like the network NCS for the outstation link. In this function, the operator answers all cues, ERF, hopset variables and authenticates net entry. The retransmission operator must ensure the outstation RT is placed in the FH/M mode.

What does Icom America do? ›

Icom manufactures communications equipment and products based in the marine, avionics, land mobile, and wide-band receiver industries. Icom America Inc. is a part of Icom Incorporated.

What is BMW ICOM? ›

BMW ICOM NEXT A is a diagnostic head unit for all BMW cars and motorcycles. It supports newest F-series and all G-series, it is capable of diagnostic, coding and programming capabilities on BMW, MINI and Rolls Royce vehicles by using BMW Online Service System - OSS.

What is ICOM degree in Pakistan? ›

I.Com means the Intermediate of Commerce. It is an optimal degree program as thousands of students get admission in I.Com every year. Students usually choose this program because it is a career-oriented field.

In which year was the radio manufacturer Icom Incorporated? ›

April 1954

How much does an ICOM 7300 cost? ›

$1,249.95Free Shipping! Ready to Ship! The Icom IC-7300 is Icom's latest SDR HF/50 MHz Transceiver. It offers 100W of output power and receieves from 0.030 to 74.800 MHZ.

Is the ICOM 7300 an SDR? ›

The IC-7300 is the first direct-sampling/DUC SDR transceiver from a Japanese amateur radio manufacturer.

When did IC-7300 come out? ›

The Icom IC-7300 saw its debut at the Tokyo Hamfair August 22, 2015. This new HF plus 6 meter 100 watt transceiver hosts new capabilities and technologies for its class.

Are Icom radios made in USA? ›

ALL Icom radios are Made in Japan

Icom has its own manufacturing facilities only in Japan. All Icom products are tested to pass rigorous in-house tests as well as environmental tests at our factories in Japan before shipping. Icom radios marked " Made in China" or made in another country are 100% fake.

Who bought Kenwood? ›

De'Longhi Group

What happened to Kenwood? ›

Kenwood (ケンウッド, Ken'uddo) is a Japanese brand of consumer electronics. It has been owned by JVCKenwood ever since October 2011, when Kenwood Corporation merged with JVC.
...
Kenwood Corporation.
Native name株式会社ケンウッド
Founded1946 (as Kasuga Radio Co. Ltd.) Komagane City, Nagano Prefecture, Japan
DefunctOctober 1, 2011
FateMerged with JVC
13 more rows

Is JVC and Kenwood the same company? ›

Victor Company of Japan, Limited (“JVC”) and Kenwood Corporation (“KENWOOD”) (collectively, “Both Companies”) established a joint holding company, “JVCKENWOOD Holdings, Inc.” on October 1, 2008 through share transfer, and carried out a management integration. Accompanying the establishment, JVCKENWOOD Holdings, Inc.

What does Yaesu mean in Japanese? ›

Yaesu (八重洲) is a district in Chūō, Tokyo, Japan, located north of Ginza, west of Nihonbashi and Kyōbashi, and adjacent to the east side of Tokyo Station. The Yaesu exit of this station, which faces Nihonbashi, is recent and primarily provides access to the Shinkansen platforms.

Why are Yaesu radios out of stock? ›

Like the Alinco above, Yaesu has announced that they are discontinuing production of the popular Yaesu FT-450D general coverage transceiver due to “parts issues.” It's worth noting the venerable Yaesu FT-DX1200 recently met the same fate.

Is Yaesu coming out with a new radio? ›

YAESU is excited to announce a new HF/50MHz 100W SDR Transceiver – FT-710 AESS.The new FT-710 AESS is estimated September 2022. The new FT-710 AESS is a compact design yet provides 100W output, utilizing the advanced digital RF technology introduced in the FTDX101 and FTDX10 series.

How far can a SINCGARS radio reach? ›

Most ground SINCGARS radios have the ability to control output power; however, most airborne SINCGARS radio sets are fixed power. Those RTs with power settings can vary transmission range from approximately 200 meters (660 feet) to 10 kilometers (km) (6.2 miles).

How does retransmission work? ›

Retransmission is a very simple concept. Whenever one party sends something to the other party, it retains a copy of the data it sent until the recipient has acknowledged that it received it. In a variety of circumstances the sender automatically retransmits the data using the retained copy.

How do you clear a military radio? ›

5) Use “CLEAR”, “OVER”, “OUT” when you finish your message. It notifies the addressee that you finished your portion of information and wait for the response or just ended the transmission (“OUT” word).

What is ICom degree in Pakistan? ›

ICom stands for Intermediate In Commerce. The ICom program is a 2 year Higher Secondary School Education program. Students who have completed their Secondary School Education are eligible to get enrolled in ICom.

What is ICom subjects? ›

INTERMEDIATE COMMERCE GROUP (I.COM PART I-II)
  • Urdu.
  • Principle of Accounting.
  • Principle of Eco. & Commercial Geo.
  • Principle of Commerce & Banking.
  • Business Mathematics & Statistics.

What is D star in ham radio? ›

The D-STAR stands for Digital Smart Technologies for Amateur Radio. It is an open standard digital communication protocol established by JARL*.

Which field is best after ICOM? ›

Best Career options after ICOM (Inter in Commerce)
  • Chartered Accountancy (CA)
  • Business Administration BBA.
  • BS Business Economics.
  • BS Insurance & Risk Management.
  • BS Public Administration.
  • BS Islamic Banking.
  • BS Economics & Management.
  • BS Entrepreneurship.
15 Mar 2017

Is ICS difficult? ›

The field of ICS does not involve any subject of Biology and Chemistry. This field is getting extremely demanding in the last 5 years and many expectations are being made over its popularity in the next few years.

What is scope of CA in Pakistan? ›

An Accountant can get bookkeeper, financial, audit, tax, internal audit jobs, accounting manager, payroll jobs etc. in multinational and national accounting firms in Pakistan. Different positions for which jobs can be get are: Tax planning.

Is Commerce good for future? ›

Is Commerce good for the future? Because there are several short-term professional courses available for commerce students in the fields of accounting, tally, computer accounting, stock market, financial accounting, marketing, and so on. As a result, commerce is a very promising career path.

Which field is best in Pakistan? ›

Following is the list of few top paid fields that one can consider to choose for a successful professional career.
  • Chartered Accountant.
  • CSS.
  • IT Professional.
  • Doctor.
  • Engineer.
  • Architecture.
  • Lawyer.
  • Business.

Is Commerce easy to study? ›

Of course commerce is easier than science . The science subjects require you to study continuously and extensively. Commerce just requires you to be clear with the basics and you are good to go. Commerce also opens the world of finance and management for you.

Can you just listen on EchoLink? ›

EchoLink is a two-way system by design, and there is no mechanism to validate listen-only stations. The last part is key. You can't use the echo link system without being a validated licensed amateur. You logistically can not listen to this system without also being allowed to talk on it.

What is D-STAR mode? ›

D-STAR (Digital Smart Technologies for Amateur Radio) is a digital voice and data protocol specification for amateur radio. The system was developed in the late 1990s by the Japan Amateur Radio League and uses minimum-shift keying in its packet-based standard.

What radios work with D-STAR? ›

D-STAR compatible radios are available for HF, VHF, UHF, and microwave amateur radio bands.

Videos

1. BG Products, Inc.
(BG Products, Inc.)
2. Growing Turkey Tail Mushrooms on Logs
(Field & Forest Products Inc.)
3. Icom Inc. Corporate Video
(Icom UK)
4. Cement Board Screws: Screws Products Inc.
(DunnLumber1907)
5. Greenman v. Yuba Power Products Inc. Case Brief Summary | Law Case Explained
(Quimbee)
6. ADAMSKI PRODUCTS INC - In The City (Official video HD)
(DO IT YOURSELF)
Top Articles
Latest Posts
Article information

Author: Fredrick Kertzmann

Last Updated: 01/14/2023

Views: 5908

Rating: 4.6 / 5 (46 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.