How to Install TWRP Recovery On Hyundai Ultra Storm - TweakDroid (2023)

  • Byadmin
  • No Comments
  • Updated On April 17, 2021 - 1:27 PM

TWRP recovery opens the doors to gain custom rom access on your Hyundai Ultra Storm and more.

How to Install TWRP Recovery On Hyundai Ultra Storm - TweakDroid (1)

When you decide to make unofficial changes to your Hyundai Ultra Storm , one of the first processes to go through on the way is to install a custom recovery. If you are a android user, you may already be aware of TWRP Recovery.

Team Win Recovery Project (TWRP) is a custom recovery image of open-source software for Android-based devices. It provides a touchscreen-enabled interface that allows users to perform various tasks including installing third-party custom ROMs, mods, kernels, taking a backup, and more.

In this article, we tell you how to install TWRP custom recovery in your Hyundai Ultra Storm , what exactly it means, and what steps you need to take to do it.

Table of Content:

  • What is TWRP Custom recovery?
  • Which one is the best? TWRP or CWM!
  • Benefits of Installing TWRP on Hyundai Ultra Storm
  • Prerequisites
  • Steps to install TWRP Custom recovery in Hyundai Ultra Storm ?
  • Magisk installation using TWRP in Hyundai Ultra Storm.
  • Finalizing – Magisk Installation Guide On Ultra Storm

What is TWRP Custom Recovery?

In addition to the clockwork mod developer solution, there are other modified recovery environments. One of the most functional solutions of this type is TeamWin Recovery Project (TWRP).

It is necessary to indicate that manufacturers limit the possibilities of pre-installed recovery. Many experienced users want to make use of the features of the hardware components as much as possible, and therefore there is so-called custom recovery, available for installation on a large list of Android devices. Such a solution is quite seriously expandable: the possibility of adding new features to the firmware and the fine configuration of the Hyundai Ultra Storm .

Now you can install TWRP recovery in your Hyundai Ultra Storm with this Guide.

Which one is the best, TWRP or CWM?

For those who have already get into the world of modding, these are both well-known names. CWM pioneered custom recovery, even though it lost many users to theTeamWin Recovery Project. The TWRP is the most recent, much more used in recent years by developers because it supports a greater number of models. As we all know no product is better than the other but for the reasons listed here, I recommend you to use TWRP instead of CWM.

Features of TWRP recovery

In TWRP recovery, the interface of it is so advanced for all kinds of people. All the options inTWRPare button featured, so very easy to handleTWRPinstead of others.
Some more features are listed below:

  • Install custom ROMs using TWRP recovery in your Hyundai Ultra Storm . You can easily Install Custom Rom like Lineage OS on your Hyundai Ultra Storm .
  • Flash modded zip files to personalize your Ultra Storm .
  • Easy to use Xposed modules.
  • Easy to Root and Unroot via TWRP Recovery by installing Magisk On Your Hyundai Ultra Storm .
  • You can always perform NANDROID backup in case of modifications or installations of modded files in your Hyundai Ultra Storm .
  • Easy access & restore android Backup.
  • Flash the image file using TWRP recovery.
  • Your can remove all bloatware on your Hyundai device using TWRP recovery.
  • For underclock and overclock.
  • Wipe, Cache and Data can be cleaned.

Disclaimer: TweakDroid team or the author of this guide is not responsible for any failure during the process. If you wish to go forward, please do it your own risk. As a precaution, read this entire file at least once before you start!


  • There should be 90% battery charge on yourUltra Storm to perform the TWRP installation process. If not, charge and then proceed.
  • Make a full backup of your Hyundai devicewhich allows you to recover in case of problems.
  • Download and Install theADB Fastboot drivers on your PC. On the installation, you have a choice to install USB drivers, so you can install drivers at the right time. You may reach any error at the time of installing custom recovery about install drivers you have to download and install drivers for your Ultra Storm in your PC. Find the download link in below.
  • Enable the USB Debugging and Developer Options on your MIUI device. (EMUI, more)
    • Enable the developer option on your Ultra Storm .
    • OnUltra Storm go to Settings ->
    • Scroll down to find About Device/Phone and tap on it.
    • Locate MIUI Version and tap several times on it.
    • Enable the USB debugging option on your Hyundai Ultra Storm device.
    • Go to Settings
    • Additional Settings-> Developer options to enable it.
    • Find the USB Debugging option and enable it.
  • Make sure your Hyundai Ultra Storm ‘s bootloader is unlocked.
  • Download and Install the ADB Fastboot drivers on your PC.

Read More Articles On Hyundai Ultra Storm

  • Lineage OS 17.1: List Of Supported Devices and Features
  • How to Root Hyundai Ultra Storm Without PC [Easy Rooting Guide]

How to Install TWRP Recovery On Hyundai Ultra Storm - TweakDroid (2)

Install TWRP custom recovery on Hyundai Ultra Storm .

  1. Download the TWRP recovery file and rename it to recovery.img and paste it into the Fastboot folder.
  2. Now you need to open the CMD window inside that folder. To do this, Shift + right-click on an empty blank space inside the folder and then select Open command window here.
  3. Enter to Fastboot mode in your Hyundai Ultra Storm by following steps:
    After shutting down your Hyundai Ultra Storm , press and hold the power button and the volume down button at the same time.
  4. Take a USB cable and connect theHyundai Ultra Storm to the PC.
  5. Enter the following in the command window to boot the Ultra Storm into bootloader / fastboot mode.
    “Making sure you have enabled USB Debugging mode on Hyundai Ultra Storm as shown above.”
    fastboot devices

    Once you enter this command it will execute the device. after entering the command press enter to execute the command.

    adb reboot bootloader

    Once theHyundai Ultra Storm has booted into quick boot mode, type in the command window:

    fastboot flash recovery recovery.img

    “This command will start installing TWRP recovery on the device.”

  6. Once TWRP is installed, enter the final command to reboot the device.
    fastboot reboot
  7. You should now have successfully installed TWRP recovery on your Hyundai Ultra Storm .

Download Required Files Below

  • Download TWRP Custom Recovery img

The function of TWRP Custom recovery

The TWRP is a “custom recovery” method to offer so many more functions than a stock recovery. The main feature of TWRP is to be totally “touch” (It also has a keyboard), and therefore the operations to be carried out are extremely easy and intuitive. Furthermore, it avoids stressing the few physical buttons on our terminal, helping to increase life expectancy.

Some of the functions are below:


Here we could flash (install) any ROM, MOD, or Kernel in your Hyundai Ultra Storm .
Note that it is possible to select a sequence of files to flash, so we can decide to flash in succession (ordered) ROM, Kernel, and MOD in one shot, which is a great convenience.


Here we can perform the various wipes of the memory to prepare the Ultra Storm for a ROM flash or clean.

Here we will find:
– Wipe Data, which allows you to delete all application data in your Hyundai Ultra Storm device
– Wipe system, which allows you to delete the currently installed ROM on your Ultra Storm device.
– Wipe Cache, which allows you to clear the device cache.
– Wipe Dalvik cache, which allows you to clear the Dalvik virtual machine cache.
– Wipe internal storage, deletes all internal memory (all files, photos, videos, etc.)


Typically also called Nandroid Backup, it is the section that an expert modder must know and use often. It allows us to make a TOTAL Backup of the ROM currently installed in your Hyundai Ultra Storm device (excluding the files in the internal memory).

We can backup:
System, which contains the operating system
– Data, which contains the application data
– Cache, which contains the device cache
– Boot, which contains the boot partition of the device
– EFS, contains all the network settings files of the device, including the IMEI, so I recommend making a backup at least once. It happens that sometimes you can delete this partition losing all connectivity, even cellular.


To restore a backup, You can choose this function on your Ultra Storm . It can only be used if we have previously made a backup present on the redmi device or external device.

It allows us to restore the ROM completely. When the device restarts, we will restart from the point where the ROM situation occurs at the backup time.


Here we can mount the partitions present in theUltra Storm device to be able to perform operations through the ADB sideload


Here we can set different recovery settings.
I advise you to set:
– Zip signature verification, which adds a level of security when installing zip files on your Ultra Storm .
– Enable MD5 verification of backup files prevents you from flashing corrupt (and therefore not working) backups.
– Timezone, usually wrong, then it will mark the wrong time.

Restore default must be used at each recovery update to avoid problems during the flash of the new version.


Here we find a wide variety of additional functions that allow us to perform more complex operations, including:
– Fix permission to be used in case we have several apps that have frequent crash problems
– ADB sideload us to connect the device to our PC to perform operations on apps with which sideloading is possible. Typically it is used to replace the current system with a modified version.
– File Manager allows us to access the files stored on the device


Allows us to restart the device in various ways:
– System will restart the Ultra Storm device.
– Power off, turn off the Ultra Storm device.
– Recovery, restart the Hyundai Ultra Storm device in recovery.
– Bootloader, restart the device in the bootloader.

Magisk installation using TWRP in yourHyundai Ultra Storm .

Magisk has been updated to stable version 15.0. This is great news for Android phone owners who can get root permissions using this rooting tool, which is becoming more and more popular (after SuperSU) called Magisk v15.0. The latest version of Magisk is now out of beta with many improvements to the Super User libraries. Magisk v15.0 is now available for official download for all Android users. Now you are on the stage of installation of twrp recovery, You can also install magisk by flashing magisk in the recovery stage.

Read More Here: How to Install Magisk On Hyundai Ultra Storm .


Finally, a way is available to be able to install twrp recovery and use many services and applications that, thanks to many who make the TWRP recovery an incorrect use towards other users and the companies themselves, tend not to want to support modified firmware.

What next? Try Custom ROM: List of Custom ROMs for Hyundai Ultra Storm

Leave a Comment


Recent Articles

Recent Posts
  • Best Casino Gaming Apps In 2022
  • How to Stop windows 10 update in progress
  • Why Your Android Phone Is Overheating (And How to Fix It)
  • IoT and Cloud Computing
  • Simple 4 Step Process to Install OV Code Signing Certificates




How to install TWRP without a computer? ›

The already-rooted device takes the place of the computer in this instance.
  1. Step 1Install ADB & Fastboot for Android. ...
  2. Step 2Download TWRP for Your Device. ...
  3. Step 3Install the Termux App. ...
  4. Step 4Enable USB Debugging. ...
  5. Step 5Connect the 2 Android Devices. ...
  6. Step 6Allow USB Debugging Permission. ...
  7. Step 7Grant Root Access.
Apr 30, 2020

How to install TWRP on rooted device? ›

What to Know
  1. Download Official TWRP app > open app > select Run with root permissions > OK.
  2. Next, select TWRP Flash > Allow > tap Select Device. Download and save latest TWRP image.
  3. In TWRP app, choose Select a file to flash > choose image file > Flash to Recovery.
Apr 23, 2022

How to boot into TWRP recovery using ADB? ›

How to boot into recovery using ADB
  1. Once ADB is installed, connect your phone to your computer via a USB cable. Make sure USB Debugging is enabled in Developer Settings.
  2. Head over to the folder where you have installed ADB. ...
  3. Next, type in adb devices and hit enter to make sure your smartphone is properly connected.
Jan 10, 2023

Can I install TWRP without unlocking bootloader? ›

Go to ADB folder in C drive and press “shift + right click” and click open cmd shell here or powershell in case of windows 10. now your device should be rebooted into download mode or edl mode. 5. Rename the downloaded TWRP to recovery, copy it and paste it in your extracted firmware files and click replace.

Do you need to unlock bootloader to install TWRP? ›

On any Android device, you have to first unlock the bootloader to install TWRP Recovery. Again, each and every device has a different method of unlocking the bootloader. Some may have a complex method while some bootloaders can be unlocked by going to developer settings in the Android Settings.

Do I need to root my device to install TWRP? ›

Note: you don't need to root your device to install TWRP, but you will need to unlock the bootloader, which will erase all the content on your device. Also the method for unlocking the bootloader is different for each device, so your mileage will vary.

How to root Android phone without PC? ›

Step 1: Download the King Root app on your phone and install it by following the on-screen instructions. Step 2: Launch the app and hit the One Click Root button to trigger the rooting action. Wait until the rooting progresses on the phone.

Will installing TWRP wipe my device? ›

from my experience you will not lose your data flashing a recovery as it only flash over the /recovery partition. if you would go to install a new rom it is recommended to wipe everything.

How to install custom ROM using TWRP? ›

What to Know
  1. Backup data > install TWRP > find ROM > download build. On GApps site, pick a platform, version, and size.
  2. Download and transfer all to your device > reboot device into recovery. Select power to boot into TWRP.
  3. Next, select Wipe and perform a factory reset.
Aug 20, 2022

How do I know if TWRP is installed? ›

Go to developer settings and click advanced reboot menu. Then hold power button and reboot to recovery. If a rather bland twrp recovery screen appears then twrp and if a star wars themed starry recovery appears then stock..

How do I access the root directory in TWRP? ›

On the TWRP home screen, select mount and check the "system" box. You should now be able to browse the entire system directory.

How do I force boot into recovery mode? ›

Here's how:
  1. Press Windows logo key + L to get to the sign-in screen, and then restart your PC by pressing the Shift key while you select the Power button > Restart in the lower-right corner of the screen.
  2. Your PC will restart in the Windows Recovery Environment (WinRE) environment.

How do I boot directly into recovery? ›

Select Start, Power, and then press and hold Shift key while clicking Restart. Select Start, Settings, Update, and Security, Recovery. Under Advanced startup, click Restart now.

How do I enable adb in recovery mode? ›

Connect the device to Mac or PC in recovery mode. Now open terminal/CMD in computer and go to platform-tools/. type and enter adb devices to check if the device is connected in recovery mode. Now type adb shell mount data and adb shell mount system to mount the respective directories.

Can you unlock a locked bootloader? ›

To unlock the bootloader and enable partitions to be reflashed, run the fastboot flashing unlock command on the device. After setting, the unlock mode persists across reboots.

How to install TWRP Recovery without PC and root? ›

Enable USB Debugging

On the phone that you want to install TWRP Recovery in, go to Settings > About Phone > and tap on the “Build number” seven-time to enable Developer Options. Now, go to the Developer Options and enable USB Debugging.

Can I unlock bootloader without OEM unlock? ›

To prevent any accidental damage to devices the manufacturer of the Android devices has locked the Bootloader. So, in order to unlock Bootloader, you have to enable (Original Equipment Manufacturer) OEM Unlock added into developer options menu of Android OS.

What happens if bootloader is unlocked? ›

Unlocking the Bootloader allows you to install custom firmware on your Android phone and gives you full access privileges to make modifications to the phone. Such modifications could involve changing some of the pre-loaded software, or could even include replacing the entire operating system.

Can I unlock bootloader without USB debugging? ›

If I recall correctly, USB debugging should not be required to unlock the bootloader as you are using fastboot commands to unlock the bootloader rather than ADB commands.

Is Unlocking bootloader the same as rooting? ›

Bootloader unlocking is sometimes a first step used to root the device; however, it is not the same as rooting the device. Most devices come with a locked bootloader, which prevents users from installing a new bootloader.

What happens if you install the wrong TWRP? ›

If you install any custom recovery other than the recommended then there arises three cases, Broken Recovery- In normal situation it will be stuck in recovery mode and won't boot in recovery. Boot-Loop (Soft Brick)- Won't boot up the device and Stuck on starting Logo.

Does TWRP need SD card? ›

NO. Installing TWRP typically is done via applying at PC appropriate Fastboot command what requires phone's bootloader is unlocked.

Can you flash rom without TWRP? ›

You Can Install Just About Any Mod You Can Think Of

Using a file flashing app allows you to install custom kernels, image files, Magisk modules, fonts, and just about any other ZIP file that is compatible with TWRP — with one small exception. For now, you are unable to flash custom ROMs with these apps.

Can you root Android without SIM card? ›

You do not need Sim to root. Use the Vivid Toolkit as a guide to root your device.

Can I root my phone myself? ›

Can I root my phone myself? These apps let you root Android with a single tap, with some popular examples being KingRoot, KingoRoot, and OneClickRoot. Download your app of choice or access the website for more instructions. The service will first check compatibility, then go ahead and root your device for you.

What can I use instead of TWRP Android recovery? ›

There are three alternatives to TWRP for Android and Android Tablet. The best alternative is OrangeFox Recovery, which is both free and Open Source. Other great apps like TWRP are Sky Hawk Recovery Project ( SHRP ) and PitchBlack-Recovery.

What does TWRP factory reset do? ›

TWRP gives you the option to not only wipe the Data partition, which is where most of your personal information in your phone is stored, but you can also wipe the System partition (where the operating system is stored) as well as the Cache and Dalvik/ART cache partitions.

Does factory reset remove TWRP? ›

Factory reset wipes only Data , Cache , and Dalvik. ) as they are located in Internal Storage/TWRP/Backups.

How do I set up recovery mode? ›

  1. Press and hold down the Volume Down button and keep holding it, then press and hold the Power button as well for a few seconds, and let go when you see the Android mascot on its back on screen.
  2. Use the Volume Down button to cycle through the options until you find Recovery mode and press the Power button to load it.
Oct 27, 2021

Can I install TWRP with stock recovery? ›

Both stock and TWRP recovery images can be flashed in TWRP without issue. Of course, ideally you'll want to flash the recovery of the same patch level as your existing system.

How do I replace TWRP with stock recovery? ›

Removing TWRP on Nexus, Sony, HTC, Motorola, LG, Asus and other similar manufactures:
  1. Download the stock recovery . ...
  2. Setup ADB and Fastboot on your PC, follow this link .
  3. Enable USB debugging on your device:
  4. Open Settings on your device. ...
  5. Open the folder where your recovery . ...
  6. Now open a command window inside that folder.

How do I fix my Android phone that won't boot into recovery? ›

Step 1: Press the Volume Down button to go to the wipe data/factory reset option. Step 2: Press the Power button to choose the option and start the process. Step 3: Upon the completion of the process, your device will reboot normally, and set it up again to use your device just like you use it normally.

How do I enable Android recovery? ›

How to Enter Android Recovery Mode?
  1. Turn off your phone.
  2. Press and hold down the Volume Down and Power buttons.
  3. Use Volume keys to select Recovery mode and press the Power button.
Sep 27, 2022

How do I upgrade to recovery mode? ›

Hold down the power button and briefly press the volume up button at the same time. When the Android system recovery menu appears, use the volume down button to highlight apply update from external SD card. Press the power button to select. Use the volume down button to highlight the software image file: update.

How to flash stock ROM using TWRP? ›

What to Know
  1. Backup data > install TWRP > find ROM > download build. On GApps site, pick a platform, version, and size.
  2. Download and transfer all to your device > reboot device into recovery. Select power to boot into TWRP.
  3. Next, select Wipe and perform a factory reset.
Aug 20, 2022

Does factory reset remove TWRP recovery? ›

Factory reset wipes only Data , Cache , and Dalvik. ) as they are located in Internal Storage/TWRP/Backups.

How do I reinstall stock recovery? ›

How to Flash a Stock ROM
  1. Find a stock ROM for your phone. ...
  2. Download the ROM to your phone.
  3. Back up all your data.
  4. Boot into recovery.
  5. Select Wipe to factory reset your phone. ...
  6. From the recovery home screen, select Install and navigate your way to the stock ROM you downloaded.
  7. Swipe the bar to begin installation.

What is the F12 boot mode? ›

If a Dell computer is unable to boot into the Operating System (OS), the BIOS update can be initiated using the F12 One Time Boot menu. Most Dell computers manufactured after 2012 have this function and you can confirm by booting the computer to the F12 One Time Boot menu.

How can I recover data from a hard drive that won't boot? ›

To recover data from a none-booting hard drive in this way, it takes the below five steps.
  1. Obtain an External Hard Disk Enclosure.
  2. Uninstall Non-booting Hard Drive.
  3. Install Hard Drive in External Enclosure.
  4. Connect USB and Power Cables.
  5. Recovering the Data.
Jan 30, 2023

How to get into recovery mode without power button Android? ›

Simply plug in your USB cable and keep holding down the volume down/volume up button to enter the recovery mode. Here when the menus appear, simply tap exit, and reboot the device. This may vary by different manufacturers using different Android versions.

Top Articles
Latest Posts
Article information

Author: Amb. Frankie Simonis

Last Updated: 03/01/2023

Views: 6273

Rating: 4.6 / 5 (56 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Amb. Frankie Simonis

Birthday: 1998-02-19

Address: 64841 Delmar Isle, North Wiley, OR 74073

Phone: +17844167847676

Job: Forward IT Agent

Hobby: LARPing, Kitesurfing, Sewing, Digital arts, Sand art, Gardening, Dance

Introduction: My name is Amb. Frankie Simonis, I am a hilarious, enchanting, energetic, cooperative, innocent, cute, joyous person who loves writing and wants to share my knowledge and understanding with you.