Best CHEAP Budget Audio Interface [2022 Reviewed] – ProRec.com (2023)

Table of Contents

Introduction

An audio interface is an extremely multifaceted tool. Finding one that does the job well on a budget can be a bit challenging. The market for interfaces is quite competitive. You’ll find an incredible amount of offerings at a wide range of prices. There are units that go for as low as $50, and some that cross the $1000 dollar mark.

With the recent progression in technology, even entry-level interfaces output sound quality that is often indiscernible from something twice the price.

When choosing the best budget audio interface, you’ll have to first establish what you need your unit for. If you’re looking to record external instruments, then you should put a lot of emphasis on sound quality while making sure that it has enough I/O channels (minimum 2 to 4 Inputs) to house all your gear. For a live streaming/podcasting setup, you want a unit that has loopback connectivity so you could merge audio streams from the inputs to your computer.

If all you need is a substitute for your computer’s built-in soundcard, then your most important criteria should be choosing a unit with a powerful DAC (Digital-to-Analog Converter). To be more specific, try to find a unit that doesn’t impose any notable latency and provides a high dynamic range (so you don’t compromise on sound quality). You should also make sure that the headphone amplifier can drive any pair (including high-impedance headphones) while providing enough volume.

To avoid exceeding your budget, make sure not to go for any extravagant features that you won’t really need. You’ll be presented with a lot of different features such as TB3 connectivity, a built-in DSP, built-in preamp emulators, ADAT/SPDIF etc. However, most of these features come at a premium price, so unless you’re planning to really use those features and don’t mind paying the extra buck, focus on choosing an interface that gets all of the basics right.

Another important aspect you should keep in mind when choosing an audio interface is driver compatibility/stability. While there are some class-compliant budget audio interfaces, a lot of units require that you install certain mandatory drivers. However, one of the most common issues in cheap interfaces is driver instability. Some units aren’t optimized for a certain operating system and would present some volatile behavior. Other units don’t even work on certain machines, so make sure to research an interface’s drivers beforehand.

Best Cheap Audio Interface Reviews

PreSonus AudioBox Go

https://www.amazon.com/PreSonus-AudioBox-GO-production-Instruments/dp/B09N557CYK

7.5Average Score

PreSonus AudioBox Go

Price to Performance

10

Input / Output

7

Sound Quality

7

Connectivity

7.5

(Video) More INCREDIBLE Products At NAMM 2022

Additional Features

6

Starting off with the cheapest audio interface on the list, the AudioBox Go is the latest model in Presonus’s renowned AudioBox series. It’s an extremely compact USB 2.0 interface that features 2 inputs and 2 outputs.

Unlike most audio interfaces, the Audiobox is very popular as a consumer grade unit. A lot of people buy the unit for its playback capability, more specifically the built-in converters which outclass a computer’s default sound card. Therefore, we had to test the AudioBox GO both as an audio playback unit and a recording hub.

On its backside, you’ll find 2 input sockets which are a TRS/XLR combo input and a ¼’’ line input. You’ll also find the 2 monitor output sockets that sit below the USB-C port. This port acts as both a pc connector and a power transmitter.

The front panel features 5 different knobs, a 48V power toggle, a ¼’’ headphone output socket, and a bunch of LED indicators. The largest knob you’ll find is a monitor dial which can be used to control the output volume. To its left are 2 gain knobs for the two separate inputs and a mix knob that can be used to indicate the output audio source. Finally, you’ll find a headphone encoder knob on the rightmost part of this panel.

Physically speaking, the AudioBox Go is one of the lightest and smallest interfaces we’ve ever tested. It has a black finish and a Box like design hence the ‘box’ name. Everything from the housing to the gain knobs are plastic, but it doesn’t really feel cheap.

In terms of sound quality, the AudioBox Go features a maximum sample rate of 96kHz and a 24 bit depth which is remarkable considering its price. It is equipped with good AD and DA converters that can virtually retain all audio data with great detail. To test the unit’s DAC, we tried running a couple of soundcloud tracks while monitoring through a pair of Aonic 40 headphones. The output was mostly granular and clear, and sounded exceptionally better than our computer’s default sound card’s audio.

The headphone amps were decently powerful and fairly loud. They have a rated impedance of 55Ω which is sufficient to power most headphones, although they’re not suitable for high-impedance pairs.

The preamps on the AudioBox go provide 50 dB of gain which can effectively drive most microphones. We tried recording using different microphones such as a Shure SM27 and a Sennheiser e945 which the AudioBox handled pretty well, even though we had to max out their gain settings. However, in some gain-hungry dynamic mics we tested, the output sounded incredibly muffled which prompted us to use an external amplifier.

We also noticed that those preamps add a slight warmth to the recordings, but it’s not too flattery or excessive. it’s extremely subtle and would probably go unnoticed to the untrained ear.

Compared to its latest predecessor (the AudioBox USB 96) the AudioBox GO is much lighter and a lot more compact. The USB 96 version does however offer better specifications than the GO even though it was released beforehand, but it also costs slightly more. For example, the USB 96 offers an extra 10dB of gain range on its mic inputs and an additional 10kHz of frequency range. It also provides around 15 dBA more dynamic range than the GO on A/D conversion and 3 dBA on D/A conversion. However, their I/O channels and controls are the same for the most part, yet the GO has an XLR/TRS input and a line input instead of 2 XLR/TRS combo inputs.

While the AudioBox GO offers incredible performance for its rather inexpensive price tag, we feel there are certain issues that Presonus should’ve addressed beforehand. For instance, the unit’s gain knobs, while incredibly smooth, become nonlinear toward the max values (around the last 10-20 degrees). So a single degree turn might add 1dB or 2dB which can be extremely irritating when dealing with precise values. Additionally, even though the unit is class-compliant, you won’t be able to use it off the bat unless you install a firmware update. Nonetheless, you’ll be able to connect it to any device afterwards including iPads and mobile phones.

Overall, we believe that for such an inexpensive price tag, the AudioBox go offers great sound quality. It is by no means a professional recording unit nor will it significantly complement your inputs. However, if you’re just starting out as a producer or are looking for an interface to passively improve your audio output, then we recommend the AudioBox GO as a solid purchase that’ll definitely provide a ton of value.

Presonus AudioBox Go Benefits

It’s one of the lightest and smallest interfaces in the market.

The built-in converters are as good as something twice the price.

Its preamps can drive most microphones.

You get to monitor through almost any Headphone pair with the GO

It’s class-compliant.

Presonus AudioBox Go Drawbacks

You’ll have to install a firmware update in order to use the unit.

The gain knobs are uneven.

Scarlett Solo

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB

7.9Average Score

Scarlett Solo

(Video) ProReck Club 4000 PA System unboxing & first look!

If you’ve already done some research on audio interfaces then you’ve probably comeacross Focusrite. The Scarlett Solo 3rd gen is the most affordable model in the Scarlett series, a compact 2 channel USB-C audio interface that offers a maximum sample rate of 192kHz and a 24 bit-depth.

Unlike what the name insinuates, the Scarlett Solo actually has 2 input and 2 output sockets. Only 1 of its inputs, however, is tailored towards microphones while the other is adapted for instruments/synths/pianos. The XLR mic input features a gain knob, a 48V toggle(for condenser mics) and an AIR mode button. On the other hand, the TRS line input only features a gain knob and an INST Mode toggle for high impedance instruments.

In addition to those controls and the 2 line outputs on the back panel, the Solo features a ¼’’ headphone socket and a large monitor knob that you can use to control both the output and headphone volume. You’ll also find a direct monitoring switch on the front panel and a USB-C port on the back panel (USB Bus-powered).

In terms of build quality, the Scarlett Solo is extremely durable even though it’s enclosed in aluminum. The knobs and controls are clicky and have just about the right amount of resistance. We didn’t find any major faults with our unit other than the usb connector, which was slightly wobbly.

The Scarlett Solo is extremely beginner-friendly and easy to use. Once we plugged it into our computer, we were presented with easy to follow video instructions that really simplified the setup process. Even the Focusrite Control software has an extremely user-friendly and responsive UI.

Since the Scarlett Solo features 2 input channels, we wanted to recreate a basic guitarist/vocalist performance set with the Solo at its center. So in the mic input channel, we plugged-in a Shure SM58 condenser mic, activated phantom power, then maxed out its gain knob. We then altered between a bass and an electric guitar on the balanced input socket after we activated the INST mode. Sure enough, the audio output was extremely transparent, detailed, and clear. Both inputs synced incredibly well together so we didn’t notice any sort of jitter or latency.

Meanwhile, we had been monitoring through a pair of Presonus E5 studio monitors which simply produced amazing audio. We only had to keep their volume level at around 60% to hear all nuances in sound. We also had a pair of DT 700 headphones for reference connected to the headphones jack, but we couldn’t control their volume separately since the unit doesn’t feature a dedicated headphone encoder.

Compared to its 2nd gen predecessor, the Scarlett Solo 3rd gen is more polished and better sounding. The 3rd gen Solo contains better converters and preamps, hence it has better specifications. For instance, the 3rd gen’s mic-pres offer a finer 56 dB of gain range compared to the 2nd gen’s 50dB. Additionally, while both units feature a similar maximum sample rate of 192kHz, the 3rd gen’s converters are much more detailed and provide an additional 5dB of dynamic range. In terms of ports, the 2nd gen Solo features 2 unbalanced line outputs instead of the 2 balanced outputs you can find on the 3rd gen. The 3rd gen also features a more progressive USB-C port compared to the 2nd gen’s USB-B. However, both units have the same number of I/O channels, similar build quality, and a relatively similar design.

Even though we had a pleasant experience using the Solo, we believe that it has some imperfections. For instance, the unit’s headphone amps sometimes produce a very dull yet audible static noise. While this noise will hardly affect your monitoring experience, it can become extremely annoying over long recording sessions.

Moreover, as we already mentioned, the headphone output doesn’t have its own volume controller. This can be an issue if you’re performing and want to monitor through speakers/studio monitors while also referencing through headphones. In that case, both outputs will produce the same audio signal and you can’t mute either except by disconnecting them.

Additionally, we think that Focusrite Control software is a redundant control and does not have any practical uses. All it does is present the same physical controls that can be found on the unit and permit you to change buffer size/sampling rate settings which you can already do in the Scarlett’s driver section.

Overall, the Focusrite Solo is an overwhelmingly price-efficient audio interface. From its powerful converters, silent preamps, and great build quality, the Solo exhibits amazing performance that’s comparable to something twice the price. It’s also an extremely refined and reliable unit that doesn’t really have any major drawbacks. You don’t have to take our word for it, its overwhelming popularity already speaks to its incredible aptitude.

Scarlett Solo Benefits

The Scarlett Solo is very durable and has great built quality.

(Video) All ProReck club systems 4 years later … My thoughts And overview…

It features powerful A/D and D/A converters.

The unit’s preamps are remarkably transparent and offer good headroom.

It doesn’t impose any notable latency.

It can be a great audio playback unit.

Scarlett Solo Drawbacks

The headphone amps sometimes produce a very low static noise.

You can’t control the headphone’s output volume separately.

The control software is in most part useless.

Tascam 4x4hr

8.1Average Score

Tascam 4x4hr

Price to Performance

8

Input / Output

9

Connectivity

7.5

Additional Features

7

(Video) ProReck PR18 Subwoofer My thoughts and sound test

The Tascam US-4x4hr is a powerful USB 2.0 audio interface that features 4 inputs and 4 outputs. It’s a relatively sizey unit that offers high quality audio at an inexpensive price.

Build wise, the Tascam 4x4hr has an extremely robust aluminum housing. The whole unit has a slight tilt that we thought really helps with controls’ accessibility. Everything is well spaced and the knobs feel very smooth which speaks to the unit’s quality.

On the unit’s front panel, you’ll find 4 input channels each of which features both an XLR input jack and a TRS line input. However, you can only use 1 input socket for each channel at a time. These channels also have their separate peak LED, Sig LED, and gain knobs. Moreover, you can activate phantom power for all inputs through a single 48V power switch.

Input channels 1-2 can also power high-impedance inputs if you toggle the INST switch. Other than that, you’ll find a monitor balance knob, an output volume encoder for channels 1-2, and two ¼’’ headphone sockets which can be controlled via a single volume controller.

On the back panel, you’ll find 4 balanced line outputs, an MIDI I/O, the USB-C port, and a 12V optional power port which you can use if you want to operate the US-4×4 with an iPad/mobile phone.

The Tascam 4x4hr is equipped with incredibly powerful converters that can process audio at a 192kHz sample rate and a 24 bit-depth. They offer around 110.8 dB (A-weighted) of dynamic range which translates to incredibly crisp and pristine audio. We also measured its mic input frequency response which yielded an impressive effective range of 20Hz-75000 Hz.

As for the unit’s preamps, the 4x4hr provides around 54dB of gain which is usually enough to power most inputs including dynamic mics like the Shure SM7B. They have an extremely low noise floor sitting at a remarkable -131 dBu which means that you won’t need an external FET-head or preamp. We also noticed that the audio signal only distorts at very high gain settings at which point the gain levels are already too excessive.

The 2 headphone sockets on the US-4x4hr are one of our favorite additions. As simple as it seems, a second headphone socket always adds a ton of value especially if you do client work. The unit’s headphone amps can provide enough amplification to drive almost any headphone including high-impedance pairs. We mainly used a 55Ω K240 and a 250Ω DT 880 which sounded great at around 65% volume despite their different impedances.

The predecessor of the Tascam US-4x4Hr which is the US-4×4 was released almost 6 years prior. So as expected, the 4x4Hr offers better specifications and superior sound quality even though both units have the same number of I/O channels. For instance, the US-4×4 only features a maximum sample rate of 96kHz and provides a slightly lower dynamic range than the US-4x4hr. Additionally, unlike the US-4x4hr, the US-4×4 can’t be bus-powered and has to be connected to an external power supply. It also consumes more power (5W) compared to the US-4x4hr’s 2.25W power consumption. Both units also have different USB ports, namely the US-4×4 features a USB-B connector compared to the US-4x4hr’s USB-C port. However, the preamps used in both units have the same specifications, and most of their controls/features remain the same.

Even though our US-4x4hr worked perfectly well, we believe that there is more room for improvement. For example, the 48V toggle activates phantom power for all 4 inputs at once which can be an issue if you’re planning to record with different types of mics/instruments. In addition to that, it often produces a loud ear-deafening pop once toggled.

Moreover, according to our measurements, the unit has an output impedance of around 67Ω which is relatively high and can negatively impact sound quality. You’ll notice its effect when you hook up a pair of low-impedance monitors/speakers which need a higher current supply that the headphone amp can’t provide. As a result, the output frequency response will be drastically affected, and your output sound quality will deteriorate. Additionally, even though the US-4x4hr can supposedly be bus-powered through USB, our unit won’t function properly unless we connect an external power supply.

Overall, the Tascam US-4x4hr is a remarkably robust unit that has some of the best specifications for a budget-friendly unit. With its incredibly low noise floor, high dynamic range, and remarkably low harmonic distortion, the US-4x4hr is one of the best sounding audio interfaces even by a stringent metric.

Tascam 4×4 Benefits

The unit has a solid build quality and is extremely durable.

It is equipped with some of the best converters in its price range.

It has one of the lowest noise floor measurements.

The US-4x4hr has 2 headphone sockets.

It features loopback connectivity.

Tascam 4×4 Drawbacks

Phantom power only activates for all input channels.

The US-4x4hr has a high output impedance which negatively affects sound quality.

You might need to plug-in an external power supply to operate your unit.

Verdict

Best CHEAP Budget Audio Interface [2022 Reviewed] – ProRec.com (1)

According to our scoring model, the variance between the highest and lowest scoring unit in any given category is 2, except for the connectivity category where all units have the same score of 7.5. You’ll find that while AudioBox Go aces the score in the price to performance category, it scores behind in every other category. On the other hand, the Tascam US-4x4hr seems to score the highest in almost all the categories the AudioBox fails in, but inversely scores the lowest in the price to performance category. Meanwhile, the Scarlett Solo exhibits a stable behavior throughout as it doesn’t score below 7 in any given category.

You can see that the US-4x4hr scores the highest in the sound quality and Input/Output categories which are usually the most important categories for an audio interface. Unlike both the Solo and the AudioBox Go, the US-4x4hr features 4 inputs and 4 ouputs with an additional headphone socket. It also features better preamps and converters than the other units, hence it has the best sound quality score. Nevertheless, you can see that the Tascam US-4x4hr scores the lowest in the price to performance category, but it is only because we are comparing it to the AudioBox Go and the Scarlett Solo which are incredibly price-efficient units.

We should however mention that the Scarlett Solo displays a very similar profile to the Tascam as the average overall variance between both units is only 0.2 which is insignificant. By analyzing the chart further, you’ll find that if we exclude the I/O category the variance between both units in any given category doesn’t exceed 1 which is very small. Not only that but It also scores the highest in the additional features category mainly because of its the renowned AIR emulators.

Nevertheless, if it falls down to it, the best budget audio interface according to our scoring model is the Tascam US-4x4hr. Leading with an overall score of 8.1, the US-4x4hr emerges as an extremely robust interface that offers amazing sound quality. It is equipped with great preamps that are coupled with some of the best converters in the market. Moreover, it has an incredibly low noise floor and an impressively low harmonic distortion which makes it one of the best budget music production units. Nothing speaks to the unit’s quality more than its amazing build quality. That’s why we recommend the US-4x4hr as a secure purhcase that provides a ton of value.

Frequently Asked Questions

Are Buget Audio Interfaces a viable choice?

Any audio interface can be incredibly useful if you don’t already have a mixer/ audio interface within your recording setup. While a more expensive unit will definitely provide more functionality, a budget interface will be more than enough for converting audio data, amplifying signals, etc. You will just lose out on more premium functions without sacrificing on sound quality.

What are the limitations of a Budget Audio Interface?

The majority of budget audio interfaces don’t contain a lot of I/O channels which can limit your ability to record live band performances, full drum sets, and several instruments at once. You might also be constrained to a certain number of plugins if you don’t have enough CPU power since budget interfaces don’t have built-in DSPs. However, you’ll be able to do everything else with a budget interface.

What is the most important aspect of choosing a Budget Audio Interface?

When choosing an audio interface, your main focus should be getting a unit with the best sound quality. For that reason, you’ll have to look into the quality of the unit’s converters and preamps. Good converters provide a lot of dynamic range and high sampling rates which allows them to retain an incredible amount of details. As for preamps, you’ll have to make sure that your unit can deliver an ample amount of gain sufficient to drive even dynamic mics. THD+N, Noise floor, and transparency are also important metrics that really affect the quality of your recordings.

If I get a Budget Audio Interface, will I have to upgrade in the near future?

Generally, you won’t have to replace your audio interface for at least a few years. Regardless of its price, an audio interface will keep on providing value as long as it can function properly and reliably. However, it is always a good idea to upgrade to a newer, more powerful unit every 5-6 years.

FAQs

Does a cheap audio interface affect sound quality? ›

It even becomes apparent once you try to overdrive or distort the signal via an amp sim. Nevertheless, this difference varies depending on which type of audio interface you are using. Cheaper audio interfaces will provide less quality enhancement as compared to high-end audio interfaces.

Do expensive audio interfaces make a difference? ›

The cheaper interfaces are going to provide you with more of the natural tone of your voice or instrument/amp. The more expensive interfaces are going to add more of what was described above… color, warmth, depth, etc. Another major difference is the number of inputs and outputs the interface has.

Is it worth upgrading audio interface? ›

With each upgrade tier, the microphone preamps inside an audio interface get better and better. So, if you want some great-sounding preamps and don't want to deal with expensive outboard gear, then your best bet is to upgrade your audio interface.

How much should I spend on an audio interface? ›

Audio Interfaces Between $50 – $200

From $50 to $200, we get into the price range of lower-end studio audio interfaces with additional functionality but limited inputs/outputs/routing and lower-quality components (which make for manageable but far-from-perfect specifications).

How long do audio interfaces last? ›

A Brief Summary. To sum up the article above, the average lifespan of the audio interface is 5 to 10 years. If you go for super cheap products, you may end up with less lifespan and the same rule goes vice versa where high-end products last approximately 10 years.

What is a good audio interface to buy? ›

Best USB interfaces are Audient iD4/iD14, SSL2/ SSL2+, Sound Designs mix pre 3, and RME Babyface. If you are looking for products to test, definitely look at Audient (Evo 4 and Evo 8, iD4 and iD14), Motu (M2 and M4), and SSL 2/SSL 2+ in addition to the Focusrite Scarlett series.

Is Behringer a good audio interface? ›

Behringer U-PHORIA UMC404HD

Behringer has brought a versatile interface to users at an incredibly low price. Definitely at the top of list for project studios with heftier I/O needs, you can track at 24-bit/192 kHz resolution and take advantage of 4 MIDAS-designed preamplifiers.

Are Tascam audio interfaces good? ›

Amazing home studio audio interface

Great quality for price. Nice preamp. Good software and you will have spen a lot more to gain any sound quality. Totally recommend for the drummer who needs great sound, performance, and a lot of inputs.

Does it matter what audio interface I use? ›

Audio interfaces do make a difference in the resulting audio. The quality of the converters is paramount for the final sound to be closer to the original analog waveform. There are many tricks you can pull off to make it sound decent, but there are no shortcuts you can take to bypass low-quality converters.

Why are Apollo interfaces so expensive? ›

The more processors the interface has, the more plugins you can simultaneously load. This is one of the reasons why the Apollo twin MKII interfaces are so expensive, because it's a feature unique to them.

When should I upgrade audio interface? ›

Having enough inputs and outputs for a recording session can be vital. Waiting to track something because you don't have an extra I/O can be killer when it comes to the momentum of the recording. So if you're recording drums for the first time and need more than your 4 mic preamps, it might be a good time to upgrade.

How important is a good audio interface? ›

It is an important device you need to make a good quality recording. You need this so you can mix and master your recordings. If you go without an audio interface, you won't have any way of plugging in a good pair of studio monitors and thus you have no room for creating an excellent recording.

Does an audio interface reduce CPU usage? ›

An audio interface can reduce CPU usage if it's the right type. DSP audio interfaces are much better at reducing CPU load than generic ones. Connection type also plays an important role, with thunderbolt having the advantage over USB devices.

Is it worth buying an audio interface? ›

You'll also need an audio interface if you want to connect your computer to your studio monitor speakers. Also if you're looking for better sound quality when producing music, an audio interface is usually a must. Essentially an audio interface is a sound card on steroids, made for producers, DJs, and musicians.

Should you buy an audio interface? ›

The advantages of an audio interface are these:

You can use any XLR microphone. You can use more than one microphone at a time (USB mics allow only one mic to connect) The headphone output in a USB interface will sound better and louder than the headphone out of a USB mic or laptop 'phone jack.

What audio interface do professional studios use? ›

Many professional studios and live sound setups use larger Focusrite Pro units as audio interfaces. The two distinct divisions (Focusrite and Focusrite Pro) produce superb audio interfaces for the hobbyist/amateur and the professional, respectively.

Should I unplug my audio interface when not in use? ›

Unplugging the audio interface after done using it is completely safe; however, it's more recommended to unplug it after you have turned the computer off to make sure that there is no application is using the audio interface.

Do audio interfaces affect sound quality? ›

Audio interfaces affect sound quality to some extent through amplification and conversion. However, all midrange interfaces have adequate circuitry to prevent distortion and quality loss. So, more expensive options don't usually make a notable difference in sound quality except when recording music.

Does audio interface reduce noise? ›

Computer in-built sound cards would generally have a lower dynamic range, on a like-for-like comparison, than what audio interfaces can produce. So, adding an audio interface to a digital audio workflow should, indeed, reduce noise.

Is a mixer an audio interface? ›

An audio interface converts analog audio signals to digital audio signals, or digital signals to analog signals, which allows you to record and playback audio to and from your computer. An audio mixer is a device with inputs and outputs, used for processing and routing audio signals.

What audio interface is best for drums? ›

Our pick for the best drum recording interface is the Focusrite Scarlett 18i20 (3rd Gen).
...
  • Focusrite Scarlett 18i20 (3rd Gen) OUR PICK. ...
  • Behringer U-PHORIA UMC1820. BEST VALUE. ...
  • MOTU 8pre-es. PREMIUM OPTION. ...
  • TASCAM US-16×08. ...
  • Presonus Studio 1824C.
3 days ago

Do I need audio interface for podcast? ›

An audio interface is not needed to record a podcast or voice-over, but is recommended. You need an audio interface for podcasting to connect pro dynamic mics and capture speakers on separate tracks. USB mics are sufficient only for 1 or 2 people and will create a 1 track recording.

Are PreSonus interfaces good? ›

PreSonus is a well-known brand used by many artists in their recording studios. The AudioBox is a great audio interface if you're looking for reliable, quality performance.

What is the best Behringer audio interface? ›

Behringer U-PHORIA UMC1820 – Best Overall

This brand offers some of the most excellent audio interfaces, and it comes with U-PHORIA UMC1820 as the best overall regarding eight-channel audio interfaces.

How good is the Behringer UM2? ›

The UM2 is an awesome device! For those looking for a bus powered 2 channel inetrface, this is a great option. For those new to audio interfaces, download ASIO4All and use that program as your audiodriver type/device. It's plug and play with that program.

Is Behringer xenyx an audio interface? ›

Along with a built-in USB/audio interface, the XENYX X1204USB comes with all the recording and editing software needed to turn your computer into a complete, high-performance home recording studio.

Does the type of audio interface affect sound quality? ›

Audio interfaces affect sound quality to some extent through amplification and conversion. However, all midrange interfaces have adequate circuitry to prevent distortion and quality loss. So, more expensive options don't usually make a notable difference in sound quality except when recording music.

Does audio interface change sound quality? ›

Yes, an audio interface can significantly improve sound quality. Especially with regards to recording. Audio interfaces allow you to record at a high sample rate and bit depth, which means you can record your music at a much higher resolution than normal.

Does the quality of your audio interface matter? ›

Audio interfaces do make a difference in the resulting audio. The quality of the converters is paramount for the final sound to be closer to the original analog waveform. There are many tricks you can pull off to make it sound decent, but there are no shortcuts you can take to bypass low-quality converters.

How important is the quality of audio interface? ›

So, they improve sound quality in the same way an amplifier or preamplifier does. The signal gets amplified when it goes through the audio interface. The result is better sound clarity. If you want crystal-clear audio, you'll need a high-quality audio interface.

Which is more important microphone or audio interface? ›

A recording microphone is more important especially if you're looking to capture good quality audio recordings. Certain microphones like USB mics can be plugged directly into your computer without requiring the aid of an audio interface.

Why are Apollo interfaces so expensive? ›

The more processors the interface has, the more plugins you can simultaneously load. This is one of the reasons why the Apollo twin MKII interfaces are so expensive, because it's a feature unique to them.

Why are some audio interfaces so expensive? ›

Audio interfaces are expensive because they are reliable, durable recording equipment that ensures high sound quality. While you could record without them, they are necessary for professional sound recording setups and worth the investment.

How much does an audio interface matter? ›

Yes, it matters because the preamp in the interface is what amplifies the mic up to an acceptable level for recording. On it's own a mic produces a very low level signal(voltage?). In most audio interfaces, the preamps are not going to be as good as those in a decent external one.

Does an audio interface reduce CPU usage? ›

An audio interface can reduce CPU usage if it's the right type. DSP audio interfaces are much better at reducing CPU load than generic ones. Connection type also plays an important role, with thunderbolt having the advantage over USB devices.

Is focusrite solo good? ›

Our verdict on the Scarlett Solo 3rd Gen 4.8. The Focusrite Scarlett Solo 3rd Gen is a no brainer for entry-level recording engineers. The unit's amazing recording quality, solid preamps, and agreeable price point set the Scarlett at the top of its class.

How do I choose the right audio interface? ›

There are many considerations when choosing a new audio interface.
...
7 Considerations When Choosing an Audio Interface
  1. Your needs. ...
  2. Connection format. ...
  3. Number of simultaneous analog ins/outs/preamps. ...
  4. Additional I/O. ...
  5. Onboard DSP. ...
  6. Sound quality. ...
  7. Price.
1 Sept 2017

How many inputs do I need audio interface? ›

Only a 1-input audio interface is needed for recording one sound source at a time. For one musician but two sources e.g. vocals and guitar, 2 inputs are required. For a drum set, a minimum of 8 is recommended. A full band requires at least 8, going up to 16 if the band has a full drum set.

Does Focusrite Scarlett improve sound quality? ›

If you've ever worked in a recording studio, you've undoubtedly used their equipment. The Focusrite Scarlett 2i2 is a powerful all-in-one solution for home recording, which makes it a great tool for podcasters who want to improve their audio quality.

Do an audio interface improve performance? ›

YES, audio interfaces increase CPU load, but just the USB audio interfaces. That's because USB audio interfaces rely on drivers (software that relays data packets from the device to/from the CPU). In other words; more work for the CPU.

Is a focusrite a DAC? ›

The Scarlett 2i2 As A Digital-to-Analog-Converter (DAC) As a digital to analog converter, the Focusrite Scarlett 2i2 (on Amazon) works great for the price.

Does audio interface reduce noise? ›

Computer in-built sound cards would generally have a lower dynamic range, on a like-for-like comparison, than what audio interfaces can produce. So, adding an audio interface to a digital audio workflow should, indeed, reduce noise.

Videos

1. HARDWARE SAMPLER 2022: Breakthrough Storage add on! | RASCSI |Raspberry pi
(TheBizzyBScience)
2. Best Speakers for Church Auditorium - 5 Best Speakers of 2022
(Top Compared)
3. 2021 Review: Should You Get The UniFi Protect System?
(Lawrence Systems)
4. Behringer B-2 Pro Review / Test
(Podcastage)
5. How I travel with all of my lighting gear and check my bags for free!
(John Gress)
6. How to get PRO AUDIO from Serato DJ to your live stream!
(Crossfader)
Top Articles
Latest Posts
Article information

Author: Wyatt Volkman LLD

Last Updated: 03/06/2023

Views: 6375

Rating: 4.6 / 5 (66 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Wyatt Volkman LLD

Birthday: 1992-02-16

Address: Suite 851 78549 Lubowitz Well, Wardside, TX 98080-8615

Phone: +67618977178100

Job: Manufacturing Director

Hobby: Running, Mountaineering, Inline skating, Writing, Baton twirling, Computer programming, Stone skipping

Introduction: My name is Wyatt Volkman LLD, I am a handsome, rich, comfortable, lively, zealous, graceful, gifted person who loves writing and wants to share my knowledge and understanding with you.